Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Egyptlifts!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Elevator contactor
Elevator contactor
Elevators are a modern and important means of transporting people and goods within large buildings and facilities. But this type of system is based not only on wires and motors. It also relies on a range of important devices, including the "elevator contactor".".
Elevator Contact Concept
An elevator contact is an important electrical device used in an elevator system to control the start and stop of the elevator electric motor. This device acts as an intermediary between the electrical system and the elevator itself, and is designed to handle high-voltage electric currents and the large current required by the elevator electric motor..
The basic concept of an elevator contactor is that when it receives a signal to operate the elevator (for example, when the desired floor button is pressed), magnetic coils are activated within the contactor. These coils make it possible to create a strong magnetic field that affects the switches inside the contactor. When the switches are activated, the electric current is delivered to the elevator electric motor, which turns on the elevator and starts moving..
In short, an elevator contactor is an electrical control device that contributes to the safe operation and discontinuation of the elevator according to the control and signals received from the control buttons and controllers inside the elevator and on the external doors.
The Importance of Elevator Contact
Elevator connector is of great importance in the elevator system and tall buildings. Here are some reasons why it's essential:
- Safety: The elevator connector contributes significantly to the safety of elevator passengers. It controls the on/off of the elevator electric motor precisely, ensuring that the elevator stands in the required places safely and without risk to passengers..
- Energy saving: The elevator contact improves energy efficiency. When the elevator is running, the electric current is directed to the motor, and when it is turned off, the flow of energy stops. This contributes to saving electricity and reducing the cost of operating the elevator.
- Damage prevention: An elevator contact prevents high starting currents from the mains from reaching the motor when the elevator is started. This reduces wear and protects the engine and elevator parts from premature damage.
- Motion Direction: The elevator contact allows the elevator to change the direction of movement easily. It can direct the elevator up or down based on signals received from the control panel inside the elevator or from the external doors.
- Fault control: An elevator contactor can be equipped with emergency switches that enable shutdown in case of a problem or emergency. This increases security and contributes to dealing with emergency situations effectively.
In general, an elevator contact is an essential and vital part of the elevator system that contributes to making moving inside buildings safe and efficient, and contributes to saving energy and preventing damage. This device is essential to ensure the safety and efficiency of elevator use in modern buildings.
High voltage and large current electrical required by the elevator electric motor.
Elevator Contact Components
An elevator contactor typically consists of a set of basic components, including:
· Coils: The coil is used to create a magnetic field when electric current is applied to it. This magnetic field allows the control of the switches inside the contactor.
· Switches: Switches are used in the contact to open and close the electrical circuit that feeds the motor. When the coil activates and creates a strong magnetic field, the switches move to enable electric current to flow to the motor, powering the elevator.
· Fans: Fans are used to cool the contact during long operation. Heat can be generated as a result of the large electric current in the contactor, and the fans help prevent overheating..
· Emergency switches: An elevator contact can be equipped with emergency switches that allow immediate stop of the elevator in case of emergency or technical problems.
The function of the contactor in the general system of the elevator is to connect or disconnect the power supply to the electric motor of the elevator based on the control signals that come from the panel control buttons inside the elevator or from the floor control unit. This allows for safe and effective control of elevator movement and stopping in the required places within the building.
How to make an elevator contactor
An elevator contact is an electrical device that controls the turning on and off of an elevator electric motor. The work of the elevator contactor is based on the principle of generating a strong magnetic field using electrical coils to stimulate switches and direct the flow of electric current.
· Coil Activation: When a signal is issued to operate the elevator (for example, when the desired floor button is pressed or when the elevator is called from the basement or upstairs), the electric current is directed through the magnetic coils inside the contact.
· Magnetic Field Creation: Files create a strong magnetic field when stimulated. This magnetic field affects the magnetic switches inside the contactor.
· Switch Activation: Under the influence of a strong magnetic field created by the coils, the magnetic switches within the contact switch from their default position to the operating position. This allows electric current to flow to the elevator electric motor.
· Elevator Activation: Once the electric motor is running, the elevator starts moving towards the desired floor.
· Elevator Deactivation: When the elevator reaches the target floor or needs to be stopped (such as an emergency or power outage), the coils are turned off, stopping the flow of power to the motor and thus stopping the elevator.
This is the basic principle of the work of an elevator contactor. These operations are carried out quickly when receiving control signals from the control panel inside the elevator or from the floor control system. Thanks to this device, elevator operation can be achieved safely and effectively inside buildings..
The impact of advanced technology in elevator contactor
Advanced technology has made a significant positive impact in the elevator contactor field, making it more efficient and safer.
Increased security: The use of advanced technology such as digital control systems and smart sensors enhances the level of safety. Advanced elevator contact can identify potential issues such as motor overheating or unusual current and react to them before any major problem occurs.
Increased efficiency: The advanced technology in elevator contactor can improve energy efficiency. Thanks to intelligent systems, elevator operation can be optimized so that it is more precisely directed to target places and avoid empty times.
Remote control and diagnostics: Using remote control technologies and internet networks, an elevator contactor can be monitored and operated from anywhere over the Internet. This enables maintenance teams to diagnose and fix problems faster and more effectively.
Improvements in wear resistance: Advanced material technology and improved design can be used to increase the resistance of the elevator contactor to wear and corrosion. This helps extend the life of the device and reduce costs associated with maintenance and replacement.
Fault Control: Advanced technology enables the elevator contact to react to faults and identify them accurately, which contributes to avoiding accidents or unexpected stops of the elevator.
Environmental Compliance: Relying on advanced technology in the elevator contact allows for a higher level of compliance with environmental standards and sustainability, making elevators more environmentally friendly.
In short, the advanced technology in elevator contact enhances the safety and performance of elevators and contributes to reduced costs and maintenance, making it a sophisticated and reliable choice to meet the needs of transporting people and goods in modern buildings..
Challenges and aspirations in the field of elevator contactor
In the field of elevator contactor, there are challenges and aspirations that form an important part of the development of this technology.
Challenges:
· Safety: Despite technological advancements, safety remains the key to elevators. Emerging challenges must be addressed in terms of safety and the implementation of new legislation and standards.
· Compliance with laws and regulations: With increasing awareness of environmental and energy issues, elevator contact manufacturers must comply with environmental regulations and standards and be able to provide products that comply with these laws..
· Maintenance cost: Elevator contactors need regular maintenance to maintain their optimal performance, reduce maintenance cost and provide high-durability devices that are an important challenge..
Aspirations:
Intelligent control and artificial intelligence: AI technologies are expected to continue to evolve and contribute to making contactor elevator smarter. This allows it to better handle data and crashes and anticipate problems.
· Intelligent Motion Steering: Elevator motion guidance systems evolve to contribute to improving the user experience, reducing waiting time and increasing efficiency.
· Reliance on renewable energy: The future of elevator contactors could see the use of renewable energy such as solar and wind energy to reduce their impact on the environment.
· Remote operation and Internet connectivity: Operators will be able to monitor and manage elevators remotely using internet and cloud connectivity technologies. This will allow faster problem diagnosis and more effective maintenance.
· Improvements in wear resistance and durability: Contector industries will have to develop more wear- and wear resistant materials and designs to enhance device life and reduce costs.
· Moving towards voice control and artificial intelligence: The future of elevator connectors is expected to see the use of voice control and interaction with artificial intelligence to improve user experience and increase safety.
In general, the advanced technology in the elevator connector field completely modifies how elevators are designed and operated and increases their safety and efficiency. Evolution in this field is expected to continue as technology evolves and trends towards sustainability and efficiency.
Safety and Reliability in Elevator Contact
Safety and reliability are crucial in the elevator contactor industry. This appliance is a vital part of the elevator system, and it must be completely reliable to ensure that the elevator operates safely and without stopping.
Design and Quality: The elevator contact must be manufactured using high-quality materials and a durable design to ensure its sustainability and resistance to wear and tear.
· Quality Tests: Each device must be tested before being installed in the elevator to verify its performance and compliance with industrial standards.
· Regular maintenance: Elevator contactor maintenance should be done regularly according to established schedules. This includes checking switches and connections and performance testing.
·
EGP439.00 Ex Tax: EGP439.00 Chint contactor 40 amp mounted It appears that you are referring to a 40 amp "Chint" type contactor intended for elevator applications. "Chint" is a brand that manufactures a wide range of electrical products, including contactors, switche.. Availability:In Stock EGP570.00 Ex Tax: EGP570.00 Chint contactor 50 amp mounted Chint Contactor 50 Amp is used in elevator applications. The contactor is an important element in the elevator electrical system and is used to control the start and stop of motors. They are well-known produc.. Availability:In Stock EGP549.00 Ex Tax: EGP549.00 Contactor 40 A Chint Used in elevator applications. Chint contactor is a specialized electrical device used in the control and electrical operation of motors in an elevator system. To connect a Chint 40 amp contactor to an elevator application, .. Availability:In Stock EGP713.00 Ex Tax: EGP713.00 Contactor 50 A Chint It is used in the electrical control and operation of motors in elevator systems. To connect to an elevator application, you must follow the manufacturer's instructions and adhere to electrical standards and directives.. Availability:In Stock EGP2.00 Ex Tax: EGP2.00 CONTACTOR 600VAC 40AMP Visit Schneider's official website: You can visit the official Schneider Electric website online. Through the website, you can search for the specific product with part number LC1D40M7 and learn more about it.Online Search.. Availability:In Stock EGP881.00 Ex Tax: EGP881.00 Contactor 65 A Chint The 65 amp Chint contactor is an important part of the elevator control system, which is used for the electrical control and operation of the motors. To connect it to an elevator application, you must follow the manufa.. Availability:In Stock EGP934.00 Ex Tax: EGP934.00 EasyPact TVS contactor 3P(3 NO) - AC-3 - <= 440 V 40A - 220 V AC coil Visit Schneider's official website: You can visit the official Schneider Electric website online. Through the website, you can search for the specific product with part num.. Availability:In Stock EGP1.00 Ex Tax: EGP1.00 EasyPact TVS contactor 3P(3 NO) - AC-3 - <= 440 V 50A - 220 V AC coil Visit Schneider's official website: You can visit the official Schneider Electric website online. Through the website, you can search for the specific product with part num.. Availability:In Stock EGP1.00 Ex Tax: EGP1.00 EasyPact TVS contactor 3P(3 NO) - AC-3 - <= 440 V 65A - 220 V AC coil The Schneider Electric LC1E65M7 65A 400V Contactor is part of the Schneider Electric contactor lineup commonly used in industrial and elevator applications. The contactor i.. Availability:In Stock EGP594.00 Ex Tax: EGP594.00 LS Contactor 40 A Contactors are electrical devices used to control the safe and effective operation and shutdown of electrical appliances. In the case of elevators, contactors are used to control elevator motors and regulate their operation and.. Availability:In Stock EGP475.00 Ex Tax: EGP475.00 LS Contactor 40 AmpA contactor is a device used to control the turning on and off of electrical systems, and the ampere is the unit of measurement for electrical current. Based on what you stated, it appears that you are referring to a "LS" type cont.. Availability:In Stock EGP270.00 Ex Tax: EGP270.00 LS Contactor 9 A LS Contactor 9 Amp is a contactor type electrical device manufactured or distributed by the company named "LS". A contactor is a device used to safely and efficiently control the turning on and off of electrical systems. In this.. Availability:In Stock
Chint contactor 40 amp mounted
Chint contactor 50 amp mounted
Contactor 40 A Chint
Contactor 50 A Chint
CONTACTOR 600VAC 40AMP
Contactor 65 A Chint
EasyPact TVS contactor 3P(3 NO) - AC-3 - <= 440 V 40A - 220 V AC coil
EasyPact TVS contactor 3P(3 NO) - AC-3 - <= 440 V 50A - 220 V AC coil
EasyPact TVS contactor 3P(3 NO) - AC-3 - <= 440 V 65A - 220 V AC coil
LS Contactor 40 A
LS Contactor 40 Amp
LS Contactor 9 A
